Green Pin® Bow Shackle BN

Standard bow shackle with safety bolt
    Highlights
  • Double safety (cotter pin & safety bolt)
  • Galvanization assures long-term durability
  • Suitable for both one-leg and multi-leg systems
  • Conforms to wide range of certifications (e.g. DNV)
  • Superior stock availability of 99%
Description

The Green Pin® Bow Shackle BN is a bow shackle with a safety bolt. The shackle offers a double safety (split pin and safety bolt) which prevents accidental unscrewing of the pin. Long-term durability is assured due to the galvanization of the Green Pin® Bow Shackle BN. Of course, the Green Pin® Bow Shackle BN conforms to a wide range of certifications from class societies such as DNV GL. The Green Pin® Bow Shackle BN is suitable for both one-leg and multi-leg systems and is available in a range with a working load limit from 0.5 up to 85 ton.

Product details
  • Productcode
    G-4163
  • Material
    bow and pin high tensile steel, Grade 6, quenched and tempered
  • Safety factor
    MBL equals 6 x WLL
  • Finish
    hot dipped galvanized
  • Temp. range
    -40°C up to +200°C
  • Certification
    • 2.1
    • 2.2
    • 3.1
    • MTCa
    • DNV 2.7-1a
    • DNV 2.7-1b
    • DNVGL-ST-0378
    • CE
    • ABS PDA
    • ABS MA
  • Standard
    EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271, Type IVA, Class 3, Grade A. From 2 t and upward these shackles comply with ASME B30.26
Technical specifications in
mminch
To download a CAD drawing, click on a product capacity below
Pdf
Article code
working load limit (ton)
working load limit (ton)
Net weight (kg)
Net weight (lbs)
diameter bow (mm) A
diameter bow (inch) A
diameter pin (mm) B
diameter pin (inch) B
diameter eye (inch) C
diameter eye (mm) C
width eye (mm) D
width eye (inch) D
width inside (inch) E
width inside (mm) E
length inside (inch) F
length inside (mm) F
width bow (inch) G
width bow (mm) G
length (inch) H
length (mm) H
length bolt (inch) I
length bolt (mm) I
width (inch) J
width (mm) J
thickness nut (inch) K
thickness nut (mm) K
Nett weight KG
Nett weight LBS
GPGHMB06 0,5 0.06 7 8 16 7 12 29 20 48 42 34 4 0.06
GPGHMB06 0,5 0.13 1/4 5/16 5/8 9/32 15/32 1 5/32 25/32 1 7/8 1 21/32 1 11/32 5/32 0.13
GPGHMB08 0,75 0.11 9 10 20 9 13,5 32 22 56 50 40 5 0.11
GPGHMB08 0,75 0.25 5/16 3/8 25/32 11/32 17/32 1 1/4 7/8 2 7/32 1 31/32 1 9/16 3/16 0.25
GPGHMB10 1 0.16 10 11 23 10 17 37 26 64 60 46 8 0.16
GPGHMB10 1 0.34 3/8 7/16 29/32 13/32 21/32 1 15/32 1 1/32 2 17/32 2 3/8 1 13/16 5/16 0.34
GPGHMB11 1,5 0.22 11 13 25 11 19 43 29 73 67 51 11 0.22
GPGHMB11 1,5 0.48 7/16 1/2 31/32 7/16 3/4 1 11/16 1 5/32 2 7/8 2 5/8 2 7/16 0.48
GPGHMB13 2 0.42 13,5 16 34 13 22 51 32 90 80 59 13 0.42
GPGHMB13 2 0.92 1/2 5/8 1 11/32 1/2 7/8 2 1 1/4 3 17/32 3 5/32 2 5/16 1/2 0.92
GPGHMB16 3,25 0.74 16 19 40 16 27 64 43 110 98 75 17 0.74
GPGHMB16 3,25 1.62 5/8 3/4 1 9/16 5/8 1 1/16 2 17/32 1 11/16 4 11/32 3 27/32 2 15/16 21/32 1.62
GPGHMB19 4,75 1.18 19 22 46 19 31 76 51 129 115 89 19 1.18
GPGHMB19 4,75 2.59 3/4 7/8 1 13/16 3/4 1 7/32 3 2 5 3/32 4 17/32 3 1/2 3/4 2.59
GPGHMB22 6,5 1.77 22 25 52 22 36 83 58 144 130 102 22 1.77
GPGHMB22 6,5 3.90 7/8 1 2 1/16 7/8 1 13/32 3 9/32 2 9/32 5 21/32 5 1/8 4 1/32 7/8 3.90
GPGHMB25 8,5 2.58 25 28 59 25 43 95 68 164 150 118 25 2.58
GPGHMB25 8,5 5.69 1 1 1/8 2 5/16 31/32 1 11/16 3 3/4 2 11/16 6 15/32 5 29/32 4 21/32 31/32 5.69
GPGHMB28 9,5 3.66 28 32 67 28 47 108 75 186 166 131 27 3.66
GPGHMB28 9,5 8.07 1 1/8 1 1/4 2 5/8 1 3/32 1 27/32 4 1/4 2 15/16 7 5/16 6 17/32 5 5/32 1 1/16 8.07
GPGHMB32 12 4.91 32 35 73 32 51 115 83 201 184 147 30 4.91
GPGHMB32 12 10.8 1 1/4 1 3/8 2 7/8 1 1/4 2 4 17/32 3 9/32 7 29/32 7 1/4 5 25/32 1 3/16 10.8
GPGHMB35 13,5 6.54 35 38 79 35 57 133 92 227 197 162 33 6.54
GPGHMB35 13,5 14.4 1 3/8 1 1/2 3 1/8 1 3/8 2 1/4 5 1/4 3 5/8 8 15/16 7 3/4 6 3/8 1 5/16 14.4
GPGHMB38 17 8.19 38 42 88 38 60 146 99 249 202 175 19 8.19
GPGHMB38 17 18.1 1 1/2 1 5/8 3 15/32 1 1/2 2 3/8 5 3/4 3 29/32 9 13/16 7 15/16 6 7/8 3/4 18.1
GPGHMB45 25 14.0 45 50 104 45 74 178 126 300 243 216 23 14.0
GPGHMB45 25 30.8 1 3/4 2 4 3/32 1 25/32 2 29/32 7 4 31/32 11 13/16 9 9/16 8 1/2 29/32 30.8
GPGHMB50 35 18.8 50 57 112 50 83 197 138 332 269 238 26 18.8
GPGHMB50 35 41.5 2 2 1/4 4 13/32 1 31/32 3 9/32 7 3/4 5 7/16 13 1/16 10 19/32 9 3/8 1 1/32 41.5
GPGHMB57 42,5 28.3 57 65 132 57 95 222 160 378 301 274 29 28.3
GPGHMB57 42,5 62.5 2 1/4 2 9/16 5 3/16 2 1/4 3 3/4 8 3/4 6 5/16 14 7/8 11 27/32 10 23/32 1 5/32 62.5
GPGHMB65 55 39.6 65 70 145 65 105 260 180 433 329 310 32 39.6
GPGHMB65 55 87.3 2 1/2 2 3/4 5 23/32 2 9/16 4 1/8 10 1/4 7 3/32 17 1/16 12 15/16 12 7/32 1 1/4 87.3
GPGHMB75 85 62.0 75 83 167 75 127 330 190 530 381 340 39 62
GPGHMB75 85 137 3 3 1/4 6 9/16 2 15/16 5 13 7 15/32 20 7/8 15 13 3/8 1 17/32 137

Frequently Asked Questions

FAQs
Where can I find CAD drawings of Green Pin® products?

If you go to the product pages of individual products on this website, you can download the CAD-drawing (3D) of that product:

  • On the product page, go to the table with dimensions
  • Select the productsize that you are interested in
  • A Download button will appear

If no Download button appears, no CAD-drawing for this product is available.

Downloading-Green-Pin-CAD-drawings

Where can I find the DNV Type Approval Certificate (2.7-1 Offshore Containers (2021)) of Green Pin® bow/dee shackles and polar shackles?

Please download it here.

Where can I find the DNV-GL Type Approval Certificate (ST-0378) of Green Pin® bow/dee shackles and polar shackles?

Please download it here.

Are there any recommendations for additional stamping on Green Pin® Shackles?

Note: Main dimensions, general info and warnings can be found in our latest catalogue.

If the recommendations in this product information are followed performance of the shackles is guaranteed:

  • permanent identification marks, or symbols, are to be made by dot peen marking or with stamps having rounded profiles (low stress stamps).
  • the number of marks on a shackle is to be kept to the minimum.
  • the use of fractions and oblique strokes is to be avoided and a dot or hyphen is preferable to a dividing line.
  • values of WLL are, generally, to be marked to one place of decimals (except for 0.25 and 0.75) up to 100 t and in integers thereafter. The word “tonnes” may be abbreviated to “t”.
  • recommended sizes of marks are
    • Diameter of part to be marked > recommended size of mark
    • less then 12.5 mm > 3.0 mm
    • 12.5 to 26 mm > 4.5 mm
    • over 26 mm > 6.0 mm

Typical arrangements of marks can be found in the following illustrations.

Additional stamping on Green Pin<sup>®</sup> Shackles 1

Additional stamping on Green Pin<sup>®</sup> Shackles 2

Additional stamping on Green Pin<sup>®</sup> Shackles 3

FAQ-Reference: PI-05-03. Rev 0.

Are there any recommendations for the inspection of shackles?

It is required that shackles are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the shackles are used in severe operating conditions.

Shackles should be inspected to ensure that:

  • all markings are legible;
  • the body and pin are both identifiable as being of the same size, type and make;
  • the threads of the pin and the body are undamaged;
  • for a safety bolt type shackle is used with the split cotter pin;
  • the body and the pin are not distorted or unduly worn;
  • the body and pin are free from nicks, gouges, cracks and corrosion;
  • shackles are not heat treated as this may affect their Working Load Limit;
  • the shackle is not modified, repaired or reshaped by welding, heating, machining or bending as this will affect the Working Load Limit;

Remove the shackle from service if:

  • all markings are not  clearly legible;
  • body and pin can not be identified as being from same size, type and make;
  • the threads of the pin and/or body are damaged;
  • for a safety bolt type shackle the split cotter pin is missing;
  • the body and/or pin is distorted or unduly worn, the maximum allowable wear is 10% of the original dimension;
  • the body and/or pin is not free from nicks, gouges, cracks or corrosion;
  • the shackle has been exposed to any heat treatment;
  • the shackle is modified, repaired or reshaped by welding, heating, machining or bending;
  • t is expected that before the next periodical inspection any of the inspection criteria above will not be passed;

FAQ-Reference: PI-06-01. Rev: 0.

Is it allowed to weld on Green Pin® lifting equipment?

No! Green Pin® products are treated with well designed heat treatment, which results in a certain Minimum Break Load and other specific mechanical properties. These properties will be destroyed by the heat of welding. It even can initiate extreme hard spots and initial cracks, that will decrease the strength and fatigue life dramatically. An exception is made for Green Pin® GH and PAS products, as these need to be welded to a surface to function. For these items, please follow the instructions that are available at Green Pin® sales.

FAQ-Reference PI-07-02 Rev. B

Where can I find the ABS PDA certificates for Green Pin® shackles?
What do the abbreviations in Green Pin® product names stand for?

BN = Bolt & Nut, or safety bolt
CL = Clevis
CP = Cotter Pin
D = D-Handle
E = Eye
EE = Eye-Eye
EJ = Eye-Jaw
EH = Eye-Hook
F = F-Handle
FN = Fixed Nut
FP = Flush Pin
GR10 = Grade 10
GR5 = Grade 5
GR8 = Grade 8
HH = Hook-Hook
HK = Hook
H-type = Horizontal
JJ = Jaw-Jaw
ROV = Remotely Operated Vehicle
S = Shackle
S/S = Stainless Steel
SC = Screw Collar, or Screw Pin
SCL = Swivel Clevis
SE = Swivel Eye
SQ = Square headed Screw Pin
U-type = Universal (Horizontal and Vertical)
V-type = Vertical