Green Pin® Locking Clamp ROV Shackle

Release ROV shackle (grade 8) with locking clamp
    Highlights
  • Powerful locking system ensures load is not released unintentionally
  • Locking system is easy to handle for the ROV pilot
  • Designed for under water use in harsh conditions
  • White coating optimizes visibility under water
  • Developed specifically for sub-sea applications
Description

The Green Pin® Locking Clamp ROV Shackle is perfect for release operations with a remotely operated vehicle (ROV). The grade 8 shackle has been specially developed for sub-sea applications and is easy to handle for the ROV pilot. The Green Pin® Locking Clamp ROV Shackle has a powerful locking system which ensures that the load will not be released before you want it to. The white coating of the Green Pin® Locking Clamp ROV Shackle optimizes visibility under water and ensures its long-term durability. The ROV shackle is available in a range with a working load limit from 6.5 up to 250 ton.

Product details
  • Productcode
    P-5365
  • Material
    bow and pin alloy steel, Grade 8, Polar Quality, quenched and tempered
  • Safety factor
    MBL equals 6 x WLLfor shackles with WLL 120 t and up the MBL equals 5 x WLL
  • Finish
    shackle bow painted white, pin painted green
  • Temp. range
    -60°C up to +200°C
  • Certification
    • 2.1
    • 2.2
    • 3.1
    • MTCa
    • CE
  • Note
    supplied without wires; design your own wiring plan
Technical specifications in
mminch
To download a CAD drawing, click on a product capacity below
Article code
working load limit TON
working load limit TON
diameter bow A
diameter bow (inch) A
diameter pin B
diameter pin (inch) B
diameter eye C
diameter eye (inch) C
width eye (inch) D
width eye D
width inside E
width inside (inch) E
length inside (inch) F
length inside F
width bow (inch) G
width bow G
length (inch) H
length H
length bolt (inch) I
length bolt I
width (inch) J
width J
width locking clamp (inch) K
width locking clamp K
Nett weight KG
Nett weight LBS
HDPOHM0120ROVRLLC 120 95 95 208 91 147 400 238 647 440 428 60 110
HDPOHM0120ROVRLLC 120 3 3/4 3 3/4 8 3/16 3 19/32 5 25/32 15 3/4 9 3/8 25 1/2 17 11/32 16 7/8 2 11/32 243
HDPOHM0150ROVRLLC 150 105 108 238 102 169 410 275 688 490 485 60 160
HDPOHM0150ROVRLLC 150 4 1/8 4 1/4 9 3/8 4 6 5/8 16 5/32 10 13/16 27 3/32 19 5/16 19 1/8 2 11/32 353
HDPOHM0200ROVRLLC 200 120 130 279 113 179 513 290 838 520 530 60 235
HDPOHM0200ROVRLLC 200 4 23/32 5 1/8 11 4 7/16 7 1/32 20 3/16 11 7/16 33 20 1/2 20 7/8 2 11/32 518
HDPOHM0250ROVRLLC 250 130 140 299 118 205 554 305 904 560 565 60 285
HDPOHM0250ROVRLLC 250 5 1/8 5 1/2 11 25/32 4 5/8 8 3/32 21 13/16 12 35 19/32 22 1/32 22 1/4 2 11/32 628
POGHMB22ROVRLLC 6,5 22 25 52 22 36 83 58 164 140 102 45 2.27
POGHMB22ROVRLLC 6,5 7/8 1 2 1/32 7/8 1 7/16 3 9/32 2 9/32 6 7/16 5 17/32 4 1 25/32 4.10
POGHMB28ROVRLLC 9,5 28 32 66 28 47 108 75 200 172 131 48 4.25
POGHMB28ROVRLLC 9,5 1 1/8 1 1/4 2 19/32 1 1/8 1 7/8 4 1/4 2 15/16 7 7/8 6 3/4 5 5/32 1 29/32 9.36
POGHMB32ROVRLLC 12 32 35 72 32 51 115 83 213 184 147 48 5.36
POGHMB32ROVRLLC 12 1 1/4 1 3/8 2 13/16 1 9/32 2 4 17/32 3 9/32 8 3/8 7 1/4 5 25/32 1 29/32 11.8
POGHMB38ROVRLLC 17 38 42 88 38 60 146 99 266 209 175 48 9.27
POGHMB38ROVRLLC 17 1 1/2 1 5/8 3 1/2 1 17/32 2 11/32 5 3/4 3 29/32 10 1/2 8 1/4 6 7/8 1 29/32 20.4
POGHMB45ROVRLLC 25 45 50 103 45 74 178 126 309 243 216 48 14.6
POGHMB45ROVRLLC 25 1 3/4 2 4 1/32 1 25/32 2 29/32 7 4 15/16 12 5/32 9 19/32 8 17/32 1 29/32 32.2
POGHMB50ROVRLLC 35 50 57 116 50 83 197 138 350 269 238 48 20.7
POGHMB50ROVRLLC 35 2 2 1/4 4 9/16 1 31/32 3 9/32 7 3/4 5 7/16 13 25/32 10 19/32 9 3/8 1 29/32 45.7
POGHMB57ROVRLLC 42,5 57 65 130 57 95 222 160 377 301 274 48 28.3
POGHMB57ROVRLLC 42,5 2 1/4 2 9/16 5 1/8 2 1/4 3 3/4 8 3/4 6 9/32 14 13/16 11 7/8 10 25/32 1 29/32 62.5
POGHMB65ROVRLLC 55 65 70 145 65 105 260 180 440 329 310 48 41
POGHMB65ROVRLLC 55 2 1/2 2 3/4 5 23/32 2 9/16 4 1/8 10 1/4 7 3/32 17 11/32 12 15/16 12 3/16 1 29/32 90.4
POGHMB75ROVRLLC 85 75 83 162 75 127 329 190 527 375 340 48 61
POGHMB75ROVRLLC 85 3 3 1/4 6 11/32 2 15/16 5 12 15/16 7 1/2 20 3/4 14 3/4 13 3/8 1 29/32 135

Product video

Frequently Asked Questions

FAQs
Are there any recommendations for additional stamping on Green Pin® Shackles?

Note: Main dimensions, general info and warnings can be found in our latest catalogue.

If the recommendations in this product information are followed performance of the shackles is guaranteed:

  • permanent identification marks, or symbols, are to be made by dot peen marking or with stamps having rounded profiles (low stress stamps).
  • the number of marks on a shackle is to be kept to the minimum.
  • the use of fractions and oblique strokes is to be avoided and a dot or hyphen is preferable to a dividing line.
  • values of WLL are, generally, to be marked to one place of decimals (except for 0.25 and 0.75) up to 100 t and in integers thereafter. The word “tonnes” may be abbreviated to “t”.
  • recommended sizes of marks are
    • Diameter of part to be marked > recommended size of mark
    • less then 12.5 mm > 3.0 mm
    • 12.5 to 26 mm > 4.5 mm
    • over 26 mm > 6.0 mm

Typical arrangements of marks can be found in the following illustrations.

Additional stamping on Green Pin<sub>®</sub> Shackles 1

Additional stamping on Green Pin<sub>®</sub> Shackles 2

Additional stamping on Green Pin<sub>®</sub> Shackles 3

FAQ-Reference: PI-05-03. Rev 0.

Are there any recommendations for the inspection of shackles?

It is required that shackles are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the shackles are used in severe operating conditions.

Shackles should be inspected to ensure that:

  • all markings are legible;
  • the body and pin are both identifiable as being of the same size, type and make;
  • the threads of the pin and the body are undamaged;
  • for a safety bolt type shackle is used with the split cotter pin;
  • the body and the pin are not distorted or unduly worn;
  • the body and pin are free from nicks, gouges, cracks and corrosion;
  • shackles are not heat treated as this may affect their Working Load Limit;
  • the shackle is not modified, repaired or reshaped by welding, heating, machining or bending as this will affect the Working Load Limit;

Remove the shackle from service if:

  • all markings are not  clearly legible;
  • body and pin can not be identified as being from same size, type and make;
  • the threads of the pin and/or body are damaged;
  • for a safety bolt type shackle the split cotter pin is missing;
  • the body and/or pin is distorted or unduly worn, the maximum allowable wear is 10% of the original dimension;
  • the body and/or pin is not free from nicks, gouges, cracks or corrosion;
  • the shackle has been exposed to any heat treatment;
  • the shackle is modified, repaired or reshaped by welding, heating, machining or bending;
  • t is expected that before the next periodical inspection any of the inspection criteria above will not be passed;

FAQ-Reference: PI-06-01. Rev: 0.

Is it allowed to weld on Green Pin® lifting equipment?

No! Green Pin® products are treated with well designed heat treatment, which results in a certain Minimum Break Load and other specific mechanical properties. These properties will be destroyed by the heat of welding. It even can initiate extreme hard spots and initial cracks, that will decrease the strength and fatigue life dramatically. An exception is made for Green Pin® GH and PAS products, as these need to be welded to a surface to function. For these items, please follow the instructions that are available at Green Pin® sales.

FAQ-Reference PI-07-02.

How should I use the Green Pin® Locking Clamp ROV Shackle?

Please find the user manual here.

What do the abbreviations in Green Pin® product names stand for?

BN = Bolt & Nut, or safety bolt
CL = Clevis
CP = Cotter Pin
D = D-Handle
E = Eye
EE = Eye-Eye
EJ = Eye-Jaw
EH = Eye-Hook
F = F-Handle
FN = Fixed Nut
FP = Flush Pin
GR10 = Grade 10
GR5 = Grade 5
GR8 = Grade 8
HH = Hook-Hook
HK = Hook
H-type = Horizontal
JJ = Jaw-Jaw
ROV = Remotely Operated Vehicle
S = Shackle
S/S = Stainless Steel
SC = Screw Collar, or Screw Pin
SCL = Swivel Clevis
SE = Swivel Eye
SQ = Square headed Screw Pin
U-type = Universal (Horizontal and Vertical)
V-type = Vertical