Green Pin® Guided Pin ROV Shackle D

Release & retrieve ROV shackle (grade 8) with guiding tube and D-handle
    Highlights
  • 100% straight alignment of the shackle pin toward the shackle eyes
  • Lifting eye on tube helps to balance the shackle
  • Optimal safety: locking system prevents loose shackle pin
  • White coating optimizes visibility under water
  • Developed specifically for sub-sea applications
Description

The Green Pin® Guided Pin ROV Shackle D is a shackle with a guiding tube with a D-Handle developed for release and retrieve operations with a remotely operated vehicle (ROV). The guiding tube ensures a 100% straight alignment of the shackle pin towards the shackle eyes which makes remote assembly and disassembly much easier. A lifting eye on the guiding tube also helps the ROV operator to balance the shackle and guarantees that the pin cannot fall out of the tube. The Green Pin® Guided Pin ROV Shackle D also improves safety through its innovative locking system which prevents the shackle pin from accidentally turning counterclockwise and coming loose.The shackle is available with a D-handle or fishtail-handle. The Green Pin® Guided Pin ROV Shackle D is delivered completely assembled and is available in a range with a working load limit from 12 up to 55 ton.

Product details
  • Productcode
    P-5362D
  • Material
    bow and pin alloy steel, Grade 8, Polar Quality, quenched and tempered
  • Safety factor
    MBL equals 5 x WLL
  • Finish
    shackle bow painted white, pin painted green
  • Temp. range
    -60°C up to +200°C
  • Certification
    • 2.1
    • 2.2
    • 3.1
    • MTCa
    • CE
Contact
Technical specifications in
mminch
Pdf Article code working load limit (ton)
working load limit (ton)
Net weight (kg)
Net weight (lbs)
diameter bow (mm)
A
P-5362D schematic
diameter bow (inch)
A
P-5362D schematic
diameter pin (mm)
B
P-5362D schematic
diameter pin (inch)
B
P-5362D schematic
diameter eye (inch)
C
P-5362D schematic
diameter eye (mm)
C
P-5362D schematic
width eye (mm)
D
P-5362D schematic
width eye (inch)
D
P-5362D schematic
width inside (inch)
E
P-5362D schematic
width inside (mm)
E
P-5362D schematic
length inside (mm)
F
P-5362D schematic
length inside (inch)
F
P-5362D schematic
width bow (inch)
G
P-5362D schematic
width bow (mm)
G
P-5362D schematic
length (mm)
H
P-5362D schematic
length (inch)
H
P-5362D schematic
length closed position (mm)
I
P-5362D schematic
length open position (mm)
I
P-5362D schematic
length closed position (inch)
I
P-5362D schematic
length open position (inch)
I
P-5362D schematic
width (inch)
J
P-5362D schematic
width (mm)
J
P-5362D schematic
guide tube diameter (inch)
K
P-5362D schematic
guide tube diameter (mm)
K
P-5362D schematic
Net weight (KG) Net weight (LBS)
POGHBB32ROVSFD 12 10.0 32 35 72 32 51 115 83 201 569 652 147 83 10.0
POGHBB32ROVSFD 12 22.1 1 1/4 1 3/8 2 27/32 1 1/4 2 4 17/32 3 9/32 7 29/32 25 21/32 22 13/32 5 25/32 3 9/32 22.1
POGHBB38ROVSFD 17 13.0 38 42 88 38 60 146 99 249 612 710 175 83 13
POGHBB38ROVSFD 17 28.7 1 1 /2 1 5/8 3 15/32 1 1/2 2 3/8 5 3/4 3 29/32 9 13/16 27 15/16 24 3/32 6 7/8 3 9/32 28.7
POGHBB45ROVSFD 25 19.0 45 50 103 45 74 178 126 300 683 802 216 83 19
POGHBB45ROVSFD 25 41.9 1 3/4 2 4 1/16 1 25/32 2 29/32 7 4 31/32 11 13/16 31 9/16 26 7/8 8 1/2 3 9/32 41.9
POGHBB50ROVSFD 35 24.0 50 57 111 50 83 197 138 331 711 844 238 83 24
POGHBB50ROVSFD 35 52.9 2 2 1/4 4 3/8 1 31/32 3 9/32 7 3/4 5 7/16 13 1/32 33 7/32 28 9 3/8 3 9/32 52.9
POGHBB65ROVSFD 55 45.0 65 70 145 65 105 260 180 433 824 994 310 102 45
POGHBB65ROVSFD 55 99.2 2 1/2 2 3/4 5 23/32 2 9/16 4 1/8 10 1/4 7 3/32 17 1/16 39 1/8 32 7/16 12 7/32 4 1/32 99.2

Product video

Frequently Asked Questions

FAQs
Are there any recommendations for additional stamping on Green Pin® Shackles?

Note: Main dimensions, general info and warnings can be found in our latest catalogue.

If the recommendations in this product information are followed performance of the shackles is guaranteed:

  • permanent identification marks, or symbols, are to be made by dot peen marking or with stamps having rounded profiles (low stress stamps).
  • the number of marks on a shackle is to be kept to the minimum.
  • the use of fractions and oblique strokes is to be avoided and a dot or hyphen is preferable to a dividing line.
  • values of WLL are, generally, to be marked to one place of decimals (except for 0.25 and 0.75) up to 100 t and in integers thereafter. The word “tonnes” may be abbreviated to “t”.
  • recommended sizes of marks are
    • Diameter of part to be marked > recommended size of mark
    • less then 12.5 mm > 3.0 mm
    • 12.5 to 26 mm > 4.5 mm
    • over 26 mm > 6.0 mm

Typical arrangements of marks can be found in the following illustrations.

Additional stamping on Green Pin<sup>®</sup> Shackles 1

Additional stamping on Green Pin<sup>®</sup> Shackles 2

Additional stamping on Green Pin<sup>®</sup> Shackles 3

FAQ-Reference: PI-05-03. Rev 0.

Are there any recommendations for the inspection of shackles?

It is required that shackles are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the shackles are used in severe operating conditions.

Shackles should be inspected to ensure that:

  • all markings are legible;
  • the body and pin are both identifiable as being of the same size, type and make;
  • the threads of the pin and the body are undamaged;
  • for a safety bolt type shackle is used with the split cotter pin;
  • the body and the pin are not distorted or unduly worn;
  • the body and pin are free from nicks, gouges, cracks and corrosion;
  • shackles are not heat treated as this may affect their Working Load Limit;
  • the shackle is not modified, repaired or reshaped by welding, heating, machining or bending as this will affect the Working Load Limit;

Remove the shackle from service if:

  • all markings are not  clearly legible;
  • body and pin can not be identified as being from same size, type and make;
  • the threads of the pin and/or body are damaged;
  • for a safety bolt type shackle the split cotter pin is missing;
  • the body and/or pin is distorted or unduly worn, the maximum allowable wear is 10% of the original dimension;
  • the body and/or pin is not free from nicks, gouges, cracks or corrosion;
  • the shackle has been exposed to any heat treatment;
  • the shackle is modified, repaired or reshaped by welding, heating, machining or bending;
  • t is expected that before the next periodical inspection any of the inspection criteria above will not be passed;

FAQ-Reference: PI-06-01. Rev: 0.

Is it allowed to weld on Green Pin® lifting equipment?

No! Green Pin® products are treated with well designed heat treatment, which results in a certain Minimum Break Load and other specific mechanical properties. These properties will be destroyed by the heat of welding. It even can initiate extreme hard spots and initial cracks, that will decrease the strength and fatigue life dramatically. An exception is made for Green Pin® GH and PAS products, as these need to be welded to a surface to function. For these items, please follow the instructions that are available at Green Pin® sales.

FAQ-Reference PI-07-02 Rev. B

How should I use the Green Pin® Guided Pin ROV Shackle?

Please find the user manual here.

What do the abbreviations in Green Pin® product names stand for?

BN = Bolt & Nut, or safety bolt
CL = Clevis
CP = Cotter Pin
D = D-Handle
E = Eye
EE = Eye-Eye
EJ = Eye-Jaw
EH = Eye-Hook
F = F-Handle
FN = Fixed Nut
FP = Flush Pin
GR10 = Grade 10
GR5 = Grade 5
GR8 = Grade 8
HH = Hook-Hook
HK = Hook
H-type = Horizontal
JJ = Jaw-Jaw
ROV = Remotely Operated Vehicle
S = Shackle
S/S = Stainless Steel
SC = Screw Collar, or Screw Pin
SCL = Swivel Clevis
SE = Swivel Eye
SQ = Square headed Screw Pin
U-type = Universal (Horizontal and Vertical)
V-type = Vertical