Green Pin® JJ Turnbuckle CP

Turnbuckle with jaw-jaw end-fitting and cotter pins, generally to ASTM F1145-92
    Highlights
  • Can be used for both lifting and lashing
  • Galvanization assures long-term durability
  • Superior stock availability of 99%
  • Reliable Green Pin® quality and support
Description

The Green Pin® JJ Turnbuckle CP is a turnbuckle with jaw-jaw end-fittings and cotter pins, generally to ASTM F1145-92. One of the unique features of Green Pin® Turnbuckles such as this one is that they can be used for both lifting and lashing. Galvanization of the Green Pin® JJ Turnbuckle CP ensures its long-term durability. The turnbuckle is available in a range with a diameter thread of 3/4" (take up of 6") up to 2 3/4" (take up of 24").

Product details
  • Productcode
    G-6313
  • Material
    drop forged high tensile steel SAE 1035 or 1045
  • Safety factor
    MBL equals 5 x WLL
  • Finish
    hot dipped galvanized
  • Temp. range
    -20°C up to +200°C
  • Certification
    • 2.1
    • 2.2
    • 3.1
    • MTCa
    • CE
  • Standard
    generally to ASTM F1145-92, formerly U.S. Federal Specification FF-T-791b
Technical specifications in
mminch
To download a CAD drawing, click on a product capacity below
Pdf Article code working load limit (ton)
working load limit (ton)
take up (inch)
take up (inch)
diameter thread (inch)
A
diameter thread (inch)
A
length closed position (mm)
B
length closed position (inch)
B
length open position (inch)
C
length open position (mm)
C
length closed position (mm)
D
length closed position (inch)
D
opening jaw (inch)
E
opening jaw (mm)
E
length inside (inch)
F
length inside (mm)
F
diameter pin (inch)
G
diameter pin (mm)
G
thickness jaw eye (inch)
H
thickness jaw eye (mm)
H
diameter jaw eye (inch)
I
diameter jaw eye (mm)
I
Net weight (KG) Net weight (LBS)
SSGPGG1906 2,36 6 3/4 369 487 439 24 38 16 16 41 2.59
SSGPGG1906 2,36 6 3/4 14 17/32 19 3/16 19 3/16 15/16 1 17/32 5/8 5/8 1 5/8 5.72
SSGPGG1909 2,36 9 3/4 444 640 514 24 38 16 16 41 3.13
SSGPGG1909 2,36 9 3/4 17 17/32 25 3/16 25 3/16 15/16 1 17/32 5/8 5/8 1 5/8 6.89
SSGPGG1912 2,36 12 3/4 520 792 590 24 38 16 16 41 3.42
SSGPGG1912 2,36 12 3/4 20 1/2 31 5/32 31 5/32 15/16 1 17/32 5/8 5/8 1 5/8 7.55
SSGPGG1918 2,36 18 3/4 670 1096 740 24 38 16 16 41 4.51
SSGPGG1918 2,36 18 3/4 26 11/32 43 5/32 43 5/32 15/16 1 17/32 5/8 5/8 1 5/8 9.95
SSGPGG2212 3,27 12 7/8 561 826 638 27 42 19 19 48 4.93
SSGPGG2212 3,27 12 7/8 22 3/32 32 17/32 32 17/32 1 3/32 1 11/16 3/4 3/4 1 29/32 10.9
SSGPGG2218 3,27 18 7/8 713 1132 790 27 42 19 19 48 6.41
SSGPGG2218 3,27 18 7/8 28 1/32 44 9/16 44 9/16 1 3/32 1 11/16 3/4 3/4 1 29/32 14.1
SSGPGG2506 4,54 6 1 447 554 532 31 50 22 20 54 5.18
SSGPGG2506 4,54 6 1 17 5/8 21 13/16 21 13/16 1 1/4 1 31/32 7/8 25/32 2 1/8 11.4
SSGPGG2512 4,54 12 1 598 859 683 31 50 22 20 54 6.43
SSGPGG2512 4,54 12 1 23 9/16 33 13/16 33 13/16 1 1/4 1 31/32 7/8 25/32 2 1/8 14.2
SSGPGG2518 4,54 18 1 750 1168 835 31 50 22 20 54 8.08
SSGPGG2518 4,54 18 1 29 17/32 46 46 1 1/4 1 31/32 7/8 25/32 2 1/8 17.8
SSGPGG2524 4,5 24 1 903 1470 988 31 50 22 20 54 8.56
SSGPGG2524 4,5 24 1 35 9/16 57 7/8 57 7/8 1 1/4 1 31/32 7/8 25/32 2 1/8 18.9
SSGPGG3212 6,9 12 1 1/4 641 914 748 44 71 29 26 68 11.2
SSGPGG3212 6,9 12 1 1/4 25 1/4 35 31/32 35 31/32 1 3/4 2 25/32 1 5/32 1 1/32 2 11/16 24.7
SSGPGG3218 6,9 18 1 1/4 803 1228 910 44 71 29 26 68 13.6
SSGPGG3218 6,9 18 1 1/4 31 5/8 48 11/32 48 11/32 1 3/4 2 25/32 1 5/32 1 1/32 2 11/16 30.0
SSGPGG3224 6,9 24 1 1/4 962 1539 1069 44 71 29 26 68 15.0
SSGPGG3224 6,9 24 1 1/4 37 7/8 60 19/32 60 19/32 1 3/4 2 25/32 1 5/32 1 1/32 2 11/16 33.1
SSGPGG3812 9,71 12 1 1/2 675 942 806 52 71 35 28 80 17.1
SSGPGG3812 9,71 12 1 1/2 26 9/16 37 3/32 37 3/32 2 1/32 2 25/32 1 3/8 1 1/8 3 5/32 37.6
SSGPGG3818 9,71 18 1 1/2 825 1244 956 52 71 35 28 80 19.3
SSGPGG3818 9,71 18 1 1/2 32 1/2 48 31/32 48 31/32 2 1/32 2 25/32 1 3/8 1 1/8 3 5/32 42.6
SSGPGG3824 9,71 24 1 1/2 980 1551 1111 52 71 35 28 80 21.8
SSGPGG3824 9,71 24 1 1/2 38 19/32 61 1/16 61 1/16 2 1/32 2 25/32 1 3/8 1 1/8 3 5/32 48.1
SSGPGG4518 12,7 18 1 3/4 938 1316 1092 60 86 41 33 90 27.3
SSGPGG4518 12,7 18 1 3/4 36 29/32 51 13/16 51 13/16 2 11/32 3 3/8 1 5/8 1 5/16 3 9/16 60.3
SSGPGG4524 12,7 24 1 3/4 1089 1621 1243 60 86 41 33 90 31.7
SSGPGG4524 12,7 24 1 3/4 42 7/8 63 13/16 63 13/16 2 11/32 3 3/8 1 5/8 1 5/16 3 9/16 69.8
SSGPGG5024 16,8 24 2 1151 1671 1338 63 93 51 40 107 49
SSGPGG5024 16,8 24 2 45 5/16 65 25/32 65 25/32 2 1/2 3 11/16 2 1 19/32 4 3/16 108
SSGPGG6424 27,2 24 2 1/2 1255 1831 1480 75 114 57 41 143 88
SSGPGG6424 27,2 24 2 1/2 49 13/32 72 3/32 72 3/32 2 15/16 4 1/2 2 1/4 1 5/8 5 5/8 194
SSGPGG6924 34 24 2 3/4 1348 1882 1604 90 110 70 41 158 103
SSGPGG6924 34 24 2 3/4 53 3/32 74 3/32 74 3/32 3 9/16 4 5/16 2 3/4 1 5/8 6 3/16 227

Frequently Asked Questions

FAQs
Where can I find CAD drawings of Green Pin® products?

If you go to the product pages of individual products on this website, you can download the CAD-drawing (3D) of that product:

  • On the product page, go to the table with dimensions
  • Select the productsize that you are interested in
  • A Download button will appear

If no Download button appears, no CAD-drawing for this product is available.

Downloading-Green-Pin-CAD-drawings

Are Green Pin® Turnbuckles suitable for lifting applications?

Green Pin® Turnbuckles G-6311, G-6312, G-6313, G-6314, G-6315, G-6323 and G-6333 are suitable for lifting applications. These items have a Proof Load equal to 2 x WLL and Minimum Breaking Load equals to 5x WLL. Of course the “Instructions for use”, as we publish them in our catalogue should be respected at all times.

Note: It is not permitted to adjust the length of the turnbuckle under full load. Tensioning below the WLL is permitted. It is advisable first to adjust roughly the length of the turnbuckle and then load the turnbuckles to a certain tension. The tension may not exceed the full capacity (WLL).

Note: that it is not permitted to lift a load by tensioning (rotating the body) the turnbuckle, as shown in the picture below:

Do not rotate turnbuckle body when lifting

FAQ-Reference PI-02-01. Revision B.

Is it allowed to weld on Green Pin® lifting equipment?

No! Green Pin® products are treated with well designed heat treatment, which results in a certain Minimum Break Load and other specific mechanical properties. These properties will be destroyed by the heat of welding. It even can initiate extreme hard spots and initial cracks, that will decrease the strength and fatigue life dramatically. An exception is made for Green Pin® GH and PAS products, as these need to be welded to a surface to function. For these items, please follow the instructions that are available at Green Pin® sales.

FAQ-Reference PI-07-02 Rev. B

What do the abbreviations in Green Pin® product names stand for?

BN = Bolt & Nut, or safety bolt
CL = Clevis
CP = Cotter Pin
D = D-Handle
E = Eye
EE = Eye-Eye
EJ = Eye-Jaw
EH = Eye-Hook
F = F-Handle
FN = Fixed Nut
FP = Flush Pin
GR10 = Grade 10
GR5 = Grade 5
GR8 = Grade 8
HH = Hook-Hook
HK = Hook
H-type = Horizontal
JJ = Jaw-Jaw
ROV = Remotely Operated Vehicle
S = Shackle
S/S = Stainless Steel
SC = Screw Collar, or Screw Pin
SCL = Swivel Clevis
SE = Swivel Eye
SQ = Square headed Screw Pin
U-type = Universal (Horizontal and Vertical)
V-type = Vertical