Green Pin® HH Turnbuckle

Turnbuckle with hook-hook end-fitting, generally to ASTM F1145-92
    Highlights
  • Can be used for both lifting and lashing
  • Galvanization assures long-term durability
  • Reliable Green Pin® quality and support
Description

The Green Pin® HH Turnbuckle is a turnbuckle with hook-hook end-fittings, generally to ASTM F1145-92. One of the unique features of Green Pin® Turnbuckles such as this one is that they can be used for both lifting and lashing. Galvanization of the Green Pin® HH Turnbuckle ensures its long-term durability. The turnbuckle is available in a range with a diameter thread of 3/8" (take up of 6") up to 1" (take up of 24").

Product details
  • Productcode
    G-6312
  • Material
    drop forged high tensile steel SAE 1035 or 1045
  • Safety factor
    MBL equals 5 x WLL
  • Finish
    hot dipped galvanized
  • Temp. range
    0°C up to +200°C
  • Certification
    • 2.1
    • 2.2
    • 3.1
    • MTCa
    • CE
  • Standard
    generally to ASTM F1145-92, formerly U.S. Federal Specification FF-T-791b
Technical specifications in
mminch
To download a CAD drawing, click on a product capacity below
Pdf
Article code
working load limit (ton)
working load limit (ton)
take up (inch)
take up (inch)
diameter thread (inch) A
diameter thread (mm) A
length closed position (inch) B
length closed position (mm) B
length open position (inch) C
length open position (mm) C
thickness hook (inch) D
thickness hook (mm) D
thickness hook (inch) E
thickness hook (mm) E
opening hook (inch) F
opening hook (mm) F
length closed position (inch) G
length closed position (mm) G
Nett weight KG
Nett weight LBS
SSGPHH1006 0,54 6 10 278 415 13 16 15 42 0.53
SSGPHH1006 0,54 6 3/8 10 15/16 16 11/32 1/2 5/8 19/32 1 11/16 1.17
SSGPHH1206 1 6 12 305 434 16 22 16 48 0.93
SSGPHH1206 1 6 1/2 12 17 1/8 5/8 7/8 5/8 1 29/32 2.06
SSGPHH1209 1 9 12 380 587 16 22 16 47 1.16
SSGPHH1209 1 9 1/2 14 15/16 23 1/8 5/8 7/8 5/8 1 7/8 2.56
SSGPHH1212 0,68 12 12 456 739 13 19 16 47 1.34
SSGPHH1212 0,68 12 1/2 17 31/32 29 3/32 1/2 3/4 5/8 1 7/8 2.96
SSGPHH1606 1,59 6 16 356 479 16 23 21 67 1.40
SSGPHH1606 1,59 6 5/8 14 18 7/8 5/8 29/32 13/16 2 5/8 3.09
SSGPHH1609 1,59 9 16 431 632 20 24 21 66 1.96
SSGPHH1609 1,59 9 5/8 17 24 7/8 25/32 15/16 13/16 2 19/32 4.31
SSGPHH1612 1,59 12 16 507 784 16 23 21 66 1.79
SSGPHH1612 1,59 12 5/8 19 31/32 30 13/16 5/8 29/32 13/16 2 19/32 3.95
SSGPHH1906 2,36 6 19 393 511 22 27 24 79 2.04
SSGPHH1906 2,36 6 3/4 15 1/2 20 1/8 7/8 1 3/32 15/16 3 1/8 4.51
SSGPHH1909 1,36 9 19 468 664 20 27 24 78 2.49
SSGPHH1909 1,36 9 3/4 18 7/16 26 1/8 25/32 1 3/32 15/16 3 3/32 5.50
SSGPHH1912 2,36 12 19 544 816 22 27 24 78 3.27
SSGPHH1912 2,36 12 3/4 21 7/16 32 1/8 7/8 1 3/32 15/16 3 3/32 7.20
SSGPHH2506 4,54 6 25 479 586 26 35 31 109 4.23
SSGPHH2506 4,54 6 1 18 7/8 23 3/32 1 1/32 1 3/8 1 1/4 4 9/32 9.33
SSGPHH2512 4,54 12 25 625 886 26 35 31 106 6.64
SSGPHH2512 4,54 12 1 24 19/32 34 7/8 1 1/32 1 3/8 1 1/4 4 5/32 14.7
SSGPHH2518 2,27 18 25 778 1191 26 35 31 106 6.50
SSGPHH2518 2,27 18 1 30 19/32 46 29/32 1 1/32 1 3/8 1 1/4 4 5/32 14.3
SSGPHH2524 2,27 24 25 928 1495 26 35 31 105 8.13
SSGPHH2524 2,27 24 1 36 17/32 58 3/4 1 1/32 1 3/8 1 1/4 4 1/8 17.9

Frequently Asked Questions

FAQs
Are Green Pin® Turnbuckles suitable for lifting applications?

Green Pin® Turnbuckles G-6311, G-6312, G-6313, G-6314, G-6315, G-6323 and G-6333 are suitable for lifting applications. These items have a Proof Load equal to 2 x WLL and Minimum Breaking Load equals to 5x WLL. Of course the “Instructions for use”, as we publish them in our catalogue should be respected at all times.

Note: It is not permitted to adjust the length of the turnbuckle under full load. Tensioning below the WLL is permitted. It is advisable first to adjust roughly the length of the turnbuckle and then load the turnbuckles to a certain tension. The tension may not exceed the full capacity (WLL).

Note: that it is not permitted to lift a load by tensioning (rotating the body) the turnbuckle, as shown in the picture below:

Do not rotate turnbuckle body when lifting

FAQ-Reference PI-02-01. Revision B.

Is it allowed to weld on Green Pin® lifting equipment?

No! Green Pin® products are treated with well designed heat treatment, which results in a certain Minimum Break Load and other specific mechanical properties. These properties will be destroyed by the heat of welding. It even can initiate extreme hard spots and initial cracks, that will decrease the strength and fatigue life dramatically. An exception is made for Green Pin® GH and PAS products, as these need to be welded to a surface to function. For these items, please follow the instructions that are available at Green Pin® sales.

FAQ-Reference PI-07-02.

What do the abbreviations in Green Pin® product names stand for?

BN = Bolt & Nut, or safety bolt
CL = Clevis
CP = Cotter Pin
D = D-Handle
E = Eye
EE = Eye-Eye
EJ = Eye-Jaw
EH = Eye-Hook
F = F-Handle
FN = Fixed Nut
FP = Flush Pin
GR10 = Grade 10
GR5 = Grade 5
GR8 = Grade 8
HH = Hook-Hook
HK = Hook
H-type = Horizontal
JJ = Jaw-Jaw
ROV = Remotely Operated Vehicle
S = Shackle
S/S = Stainless Steel
SC = Screw Collar, or Screw Pin
SCL = Swivel Clevis
SE = Swivel Eye
SQ = Square headed Screw Pin
U-type = Universal (Horizontal and Vertical)
V-type = Vertical