Green Pin® Lifting Eye GR8

Grade 8 lifting eye
    Highlights
  • Reliable Green Pin® quality and support
  • Superior stock availability of 99%
Description

The Green Pin® Lifting Eye is a grade 8 lifting eye. Our extensive range of alloy steel lifting eyes, incorporates 22 different ISO metric threads as standard. Other special threads such as UNC, are also available. The WLL for lifting points are valid for in-line lifting only, but can be side loaded with reduction of the WLL. The longer thread length of the AL makes a through-hole mounting with a nut and washer on the other side possible. The nut on the bolt should at least be class 8, but class 10 or 12 is recommended. WLL and CE are stamped on the body. Safety factor is 5:1. The thread length of the lifting eye should be adapted to the material of the load. The Green Pin® Lifting Eye is available in a range with a working load limit from 0.2 t. up to 36 t.

Product details
  • Productcode
    AL
  • Material
    alloy steel, Grade 8, quenched and tempered
  • Safety factor
    MBL equals 5 x WLL
  • Finish
    painted white
  • Temp. range
    -40°C up to +200°C
  • Certification
    • 2.1
    • 2.2
    • 3.1
    • MPIb
    • CE
Technical specifications in
mminch
To download a CAD drawing, click on a product capacity below
Pdf
Article code
working load limit (ton)
working load limit (ton)
diameter thread (inch) A
diameter thread (mm) A
diameter base (inch) B
diameter base (mm) B
diameter eye outside (inch) C
diameter eye outside (mm) C
diameter eye inside (inch) D
diameter eye inside (mm) D
length (inch) E
length (mm) E
thickness base (inch) F
thickness base (mm) F
diameter (inch) G
diameter (mm) G
Nett weight KG
Nett weight LBS
GPAL06 0,2 6 20 34 20 20 17 7 0.05
GPAL06 0,2 M6 X 1.00 25/32 1 11/32 25/32 25/32 21/32 9/32 0.11
GPAL08 0,4 8 20 34 20 24 17 7 0.06
GPAL08 0,4 M8 X 1.25 25/32 1 11/32 25/32 15/16 21/32 9/32 0.13
GPAL10 0,7 10 20 38 22 30 19 8 0.08
GPAL10 0,7 M10 X 1.50 25/32 1 1/2 7/8 1 3/16 3/4 5/16 0.18
GPAL12 1 12 25 47 26 36 23 10 0.14
GPAL12 1 M12 X 1.75 31/32 1 27/32 1 1/16 1 13/32 29/32 13/32 0.31
GPAL14 1,2 14 30 57 29 40 28 14 0.25
GPAL14 1,2 M14 X 2.00 1 3/16 2 1/4 1 3/16 1 9/16 1 1/16 9/16 0.55
GPAL16 1,5 16 36 65 35 53 30 14 0.39
GPAL16 1,5 M16 X 2.00 1 13/32 2 15/32 1 3/8 2 3/32 1 7/32 9/16 0.86
GPAL18 2 18 36 65 35 53 30 14 0.40
GPAL18 2 M18 X 2.50 1 13/32 2 15/32 1 3/8 2 3/32 1 7/32 9/16 0.87
GPAL20 2,5 20 40 73 39 58 34 16 0.58
GPAL20 2,5 M20 X 2.50 1 9/16 2 27/32 1 9/16 2 9/32 1 11/32 5/8 1.28
GPAL22 3 22 42 82 44 64 38 19 0.77
GPAL22 3 M22 X 2.50 1 21/32 3 7/32 1 25/32 2 17/32 1 1/2 3/4 1.70
GPAL24 4 24 55 95 54 84 40 20 1.12
GPAL24 4 M24 X 3.00 2 5/32 3 3/4 2 5/32 3 5/16 1 9/16 25/32 2.47
GPAL27 5 27 55 95 54 84 40 20 1.19
GPAL27 5 M27 X 3.00 2 5/32 3 3/4 2 5/32 3 5/16 1 9/16 25/32 2.62
GPAL30 6 30 60 108 59 99 49 24 1.87
GPAL30 6 M30 X 3.50 2 3/8 4 1/4 2 3/8 3 29/32 1 15/16 15/16 4.12
GPAL33 7 33 60 108 59 99 49 24 1.96
GPAL33 7 M33 X 3.50 2 3/8 4 1/4 2 3/8 3 29/32 1 15/16 15/16 4.33
GPAL36 8 36 65 118 67 117 45 25 2.44
GPAL36 8 M36 X 4.00 2 9/16 4 21/32 2 11/16 4 19/32 1 27/32 31/32 5.38
GPAL39 9 39 65 118 67 117 45 25 2.59
GPAL39 9 M39 X 4.00 2 9/16 4 21/32 2 11/16 4 19/32 1 27/32 31/32 5.70
GPAL42 10 42 70 139 79 135 56 31 4.14
GPAL42 10 M42 X 4.50 2 3/4 5 19/32 3 5/32 5 5/16 2 13/32 1 7/32 9.13
GPAL45 15 45 70 139 79 135 56 31 4.15
GPAL45 15 M45 X 4.50 2 3/4 5 19/32 3 5/32 5 5/16 2 13/32 1 7/32 9.15
GPAL48 18 48 95 181 97 150 68 43 8.22
GPAL48 18 M48 X 5.00 3 3/4 7 1/8 3 13/16 5 29/32 2 11/16 1 21/32 18.1
GPAL52 20 52 95 181 97 150 68 43 8.55
GPAL52 20 M52 X 5.00 3 3/4 7 1/8 3 13/16 5 29/32 2 11/16 1 21/32 18.9
GPAL56 25 56 95 181 97 150 68 43 8.85
GPAL56 25 M56 X 5.50 3 3/4 7 1/8 3 13/16 5 29/32 2 11/16 1 21/32 19.5
GPAL60 30 60 95 181 97 150 68 43 9.16
GPAL60 30 M60 X 5.50 3 3/4 7 1/8 3 13/16 5 29/32 2 11/16 1 21/32 20.2
GPAL64 36 64 95 181 97 150 68 43 9.55
GPAL64 36 M64 X 6.00 3 3/4 7 1/8 3 13/16 5 29/32 2 11/16 1 21/32 21.1

Frequently Asked Questions

FAQs
How should I use Green Pin® Lifting eyes (EL/AL/OL/ADA/PAS)?

Please find the user manual here.

Is it allowed to weld on Green Pin® lifting equipment?

No! Green Pin® products are treated with well designed heat treatment, which results in a certain Minimum Break Load and other specific mechanical properties. These properties will be destroyed by the heat of welding. It even can initiate extreme hard spots and initial cracks, that will decrease the strength and fatigue life dramatically. An exception is made for Green Pin® GH and PAS products, as these need to be welded to a surface to function. For these items, please follow the instructions that are available at Green Pin® sales.

FAQ-Reference PI-07-02.

Where can I find CAD drawings of Green Pin® products?

If you go to the product pages of individual products on this website, you can download the CAD-drawing (3D) of that product:

  • On the product page, go to the table with dimensions
  • Select the productsize that you are interested in
  • A Download button will appear

If no Download button appears, no CAD-drawing for this product is available.

Downloading-Green-Pin-CAD-drawings

What do the abbreviations in Green Pin® product names stand for?

BN = Bolt & Nut, or safety bolt
CL = Clevis
CP = Cotter Pin
D = D-Handle
E = Eye
EE = Eye-Eye
EJ = Eye-Jaw
EH = Eye-Hook
F = F-Handle
FN = Fixed Nut
FP = Flush Pin
GR10 = Grade 10
GR5 = Grade 5
GR8 = Grade 8
HH = Hook-Hook
HK = Hook
H-type = Horizontal
JJ = Jaw-Jaw
ROV = Remotely Operated Vehicle
S = Shackle
S/S = Stainless Steel
SC = Screw Collar, or Screw Pin
SCL = Swivel Clevis
SE = Swivel Eye
SQ = Square headed Screw Pin
U-type = Universal (Horizontal and Vertical)
V-type = Vertical