Green Pin® Heavy Duty Dee Shackle BN

High load capacity dee shackle with safety bolt
    Highlights
  • Good choice for heavy lifting projects
  • Suitable for one-leg systems only
  • Superior stock availability of 99%
  • Conforms to wide range of certifications
  • Safety bolt: perfect for when rotation of the pin is a risk
Description

The Green Pin® Heavy Duty Dee Shackle BN is a high load capacity dee shackle with a safety bolt. When rotation of the pin is a risk, this shackle's safety bolt prevents accidental unscrewing. Of course, the Green Pin® Heavy Duty Dee Shackle BN conforms to a wide range of certifications. The Green Pin® Heavy Duty Dee Shackle BN is suitable for one-leg systems only and is available with a working load limit of 120t.

Product details
  • Productcode
    P-6038
  • Material
    bow and pin alloy steel, Grade 8, quenched and tempered
  • Safety factor
    MBL equals 5 x WLL
  • Finish
    shackle bow painted silver, pin painted green
Contact
Technical specifications in
mminch
To download a CAD drawing, click on a product capacity below
Pdf Article code working load limit (ton)
working load limit (ton)
Weight shackle pin (kg)
Weight shackle pin (lb)
Net weight (kg)
Net weight (lbs)
diameter bow (mm)
A
G-6038 schematic
diameter bow (inch)
A
G-6038 schematic
diameter pin (inch)
B
G-6038 schematic
diameter pin (mm)
B
G-6038 schematic
diameter eye (mm)
C
G-6038 schematic
diameter eye (inch)
C
G-6038 schematic
width eye (inch)
D
G-6038 schematic
width eye (mm)
D
G-6038 schematic
width inside (inch)
E
G-6038 schematic
width inside (mm)
E
G-6038 schematic
length inside (inch)
F
G-6038 schematic
length inside (mm)
F
G-6038 schematic
length (inch)
G
G-6038 schematic
length (mm)
G
G-6038 schematic
length bolt (inch)
H
G-6038 schematic
length bolt (mm)
H
G-6038 schematic
thickness nut (inch)
I
G-6038 schematic
thickness nut (mm)
I
G-6038 schematic
Net weight (KG) Net weight (LBS)
PDF HDGPDM0120 120 28,12 110 95 95 204 95 147 274 520 440 50 110
PDF HDGPDM0120 120 61,99 243 3 3/4 3 3/4 8 1/32 3 3/4 5 25/32 10 25/32 20 15/32 17 5/16 1 31/32 243

Frequently Asked Questions

FAQs
Where can I find CAD drawings of Green Pin® products?

If you go to the product pages of individual products on this website, you can download the CAD-drawing (3D) of that product:

  • On the product page, go to the table with dimensions
  • Select the productsize that you are interested in
  • A Download button will appear

If no Download button appears, no CAD-drawing for this product is available.

Downloading-Green-Pin-CAD-drawings

Are there any recommendations for additional stamping on Green Pin® Shackles?

Note: Main dimensions, general info and warnings can be found in our latest catalogue.

If the recommendations in this product information are followed performance of the shackles is guaranteed:

  • permanent identification marks, or symbols, are to be made by dot peen marking or with stamps having rounded profiles (low stress stamps).
  • the number of marks on a shackle is to be kept to the minimum.
  • the use of fractions and oblique strokes is to be avoided and a dot or hyphen is preferable to a dividing line.
  • values of WLL are, generally, to be marked to one place of decimals (except for 0.25 and 0.75) up to 100 t and in integers thereafter. The word “tonnes” may be abbreviated to “t”.
  • recommended sizes of marks are
    • Diameter of part to be marked > recommended size of mark
    • less then 12.5 mm > 3.0 mm
    • 12.5 to 26 mm > 4.5 mm
    • over 26 mm > 6.0 mm

Typical arrangements of marks can be found in the following illustrations.

Additional stamping on Green Pin<sup>®</sup> Shackles 1

Additional stamping on Green Pin<sup>®</sup> Shackles 2

Additional stamping on Green Pin<sup>®</sup> Shackles 3

FAQ-Reference: PI-05-03. Rev 0.

Are there any recommendations for the inspection of shackles?

It is required that shackles are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the shackles are used in severe operating conditions.

Shackles should be inspected to ensure that:

  • all markings are legible;
  • the body and pin are both identifiable as being of the same size, type and make;
  • the threads of the pin and the body are undamaged;
  • for a safety bolt type shackle is used with the split cotter pin;
  • the body and the pin are not distorted or unduly worn;
  • the body and pin are free from nicks, gouges, cracks and corrosion;
  • shackles are not heat treated as this may affect their Working Load Limit;
  • the shackle is not modified, repaired or reshaped by welding, heating, machining or bending as this will affect the Working Load Limit;

Remove the shackle from service if:

  • all markings are not  clearly legible;
  • body and pin can not be identified as being from same size, type and make;
  • the threads of the pin and/or body are damaged;
  • for a safety bolt type shackle the split cotter pin is missing;
  • the body and/or pin is distorted or unduly worn, the maximum allowable wear is 10% of the original dimension;
  • the body and/or pin is not free from nicks, gouges, cracks or corrosion;
  • the shackle has been exposed to any heat treatment;
  • the shackle is modified, repaired or reshaped by welding, heating, machining or bending;
  • t is expected that before the next periodical inspection any of the inspection criteria above will not be passed;

FAQ-Reference: PI-06-01. Rev: 0.

Is it allowed to weld on Green Pin® lifting equipment?

No! Green Pin® products are treated with well designed heat treatment, which results in a certain Minimum Break Load and other specific mechanical properties. These properties will be destroyed by the heat of welding. It even can initiate extreme hard spots and initial cracks, that will decrease the strength and fatigue life dramatically. An exception is made for Green Pin® GH and PAS products, as these need to be welded to a surface to function. For these items, please follow the instructions that are available at Green Pin® sales.

FAQ-Reference PI-07-02 Rev. B

How do I select the correct Green Pin® shackle for optimal sling conditions?

Please find the answer in this document.

What do the abbreviations in Green Pin® product names stand for?

BN = Bolt & Nut, or safety bolt
CL = Clevis
CP = Cotter Pin
D = D-Handle
E = Eye
EE = Eye-Eye
EJ = Eye-Jaw
EH = Eye-Hook
F = F-Handle
FN = Fixed Nut
FP = Flush Pin
GR10 = Grade 10
GR5 = Grade 5
GR8 = Grade 8
HH = Hook-Hook
HK = Hook
H-type = Horizontal
JJ = Jaw-Jaw
ROV = Remotely Operated Vehicle
S = Shackle
S/S = Stainless Steel
SC = Screw Collar, or Screw Pin
SCL = Swivel Clevis
SE = Swivel Eye
SQ = Square headed Screw Pin
U-type = Universal (Horizontal and Vertical)
V-type = Vertical

How are Green Pin® shackles different?

Green Pin® shackles are known for their robust quality and versatility, are differentiated across various attributes which suit specific needs in different industries, including construction, maritime, and heavy lifting. They differ in grade, certificate, crown width, end fitting, number of safeties and special features. To discover all Green Pin shackles, visit the shackles category page here.